Manual effort
Repeated scrubbing and manual passes consume technician time that could go into service work.
INDUSTRY SOLUTION · AUTOMOTIVE SERVICE CENTRES
High-pressure cleaning engineered for car garages & two-wheelers.
Build a faster, cleaner service-bay workflow with PRIME triplex plunger pump technology, controlled water delivery, application-focused pressure selection and in-house spare-part support.
- Car garages
- Two-wheeler centres
- Multi-brand workshops
- Fleet service
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE AUTOMOTIVE SERVICE CENTRES OPPORTUNITY
Turn vehicle cleaning into a faster service process.
Car garages and two-wheeler service centres need cleaning equipment that works repeatedly, fits the bay and remains supportable after installation. PRIME brings pressure-pump engineering, application selection and spare-part support into one operating model.
Water control
Uncontrolled delivery raises water use and makes results inconsistent from bay to bay.
Cleaning consistency
Different operators, nozzles and equipment create uneven results across vehicles.
Equipment continuity
Pressure equipment needs dependable maintenance, genuine parts and practical service support.
Procurement complexity
When pumps and spares depend on distant supply chains, ordering, freight and lead time become part of the maintenance problem.
02APPLICATION PORTFOLIO
Where PRIME pressure is used inside a service centre.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 Bar
Pre-service vehicle wash
Remove road dirt and mud before inspection so technicians work on a clean vehicle.
02150 or 250 Bar
Underbody & wheel-arch cleaning
Reach caked mud and grime in wheel arches, chassis and undercarriage areas.
03150 Bar
Engine bay cleaning
Controlled cleaning of engine bays ahead of diagnostics, with the right nozzle and distance.
04150 Bar
Two-wheeler washing
Compact, repeatable cleaning for bikes and scooters across a busy service day.
05250 Bar
Workshop floor wash-down
Clear oil-stained, dusty bay floors and drains with higher-pressure delivery.
06150 Bar
Pre-delivery finishing
Final rinse and presentation clean before the vehicle goes back to the customer.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
One pressure system. One complete cycle.
PRIME is positioned around the complete operating cycle: pump, pressure components, accessories, manufactured spares and application support. The workshop is not left managing disconnected equipment and service channels.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Manufactured in India
A direct Indian manufacturing base supports a more practical procurement and service conversation for local automotive businesses.
In-house spare capability
PRIME manufactures spare parts in-house, so maintenance continuity is not an afterthought.
Application-led selection
Pressure, flow, nozzle, duty cycle and installation are considered together to fit the service bay.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
From wash requirement to a configured pressure system. The goal is not simply to add pressure. It is a repeatable cleaning workflow that fits the workshop, operator and duty cycle.
METHOD 01
Bay-based wash workflow
A fixed sequence that every operator follows, so results do not depend on who is holding the lance.
- 1Understand the bay: vehicle type, number of bays, cleaning frequency and installation space
- 2Pre-rinse to loosen surface dirt at moderate distance
- 3Targeted pass on wheels, arches and underbody
- 4Final rinse and visual check before handover
METHOD 02
Underbody & heavy-soil pass
Extra attention where mud and road grime collect.
- 1Position the vehicle with access to the underbody
- 2Select the higher-pressure platform where soil is heavy
- 3Work in overlapping passes from top to bottom
- 4Check drainage so wash water leaves the bay cleanly
METHOD 03
Two-wheeler quick cycle
Short, repeatable cycles that keep two-wheeler throughput moving.
- 1Set a standard nozzle and working distance
- 2Rinse frame and wheels first
- 3Controlled pass around engine and chain areas
- 4Final rinse; track time per vehicle
METHOD 04
Floor & bay wash-down
End-of-day clean-up using the same pressure system.
- 1Sweep or clear loose waste
- 2Apply a pressure pass along drains and oil-stained areas
- 3Rinse to the drain
- 4Return hose, gun and lance to a fixed point
05RECOMMENDED PRIME SOLUTIONS FOR AUTOMOTIVE SERVICE CENTRES
Two core platforms. Choose by application.
Two core platforms. Choose by application. Final selection should be confirmed against the actual cleaning duty and selected configuration.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR AUTOMOTIVE SERVICE CENTRESRoutine vehicle cleaning
The practical starting point for everyday car and two-wheeler washing.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR AUTOMOTIVE SERVICE CENTRESDemanding workshop cleaning
For heavy soil, underbody work and floor wash-down where more pressure is needed.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
PRIME's value should be measured at the workshop level, not by a generic percentage. Compare your current process with the configured application across four operating metrics.
Fewer manual passes
High-pressure delivery can reduce prolonged scrubbing when nozzle, pressure and process are correctly configured.
TRACKOperator-hours per vehicle
Controlled delivery
Measure flow and cleaning duration to understand the water used per vehicle or service cycle.
TRACKLitres per vehicle
Right-sized motor duty
Use the required motor platform and operating hours rather than treating maximum capacity as the target.
TRACKkWh per operating hour
Compact installation
Plan the pump, accessories and hose management around the actual service-bay footprint.
TRACKInstalled footprint
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the pressure system serviceable.
For a workshop, the value of a pump is not only its purchase price. Maintenance continuity, genuine parts availability and technical support matter throughout the operating life.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
One industry. Two opportunities.
PRIME can support both sides of the automotive market: the service centre that needs a dependable pressure solution and the local dealer who wants to build a recurring product-and-spares business.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Build a local PRIME business.
Develop relationships with car garages, two-wheeler workshops, multi-brand centres and fleet service operators. Combine equipment sales with genuine spares and technical support.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Configure your cleaning system.
Tell PRIME your vehicle mix, service bays, cleaning frequency and installation constraints. Get an application-led recommendation.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Car garage · Two-wheeler service centre · Multi-brand workshop · Fleet service
