Festival and weekly peaks
Large gatherings leave courtyards, steps and corridors heavily soiled in a short time.
INDUSTRY SOLUTION · TEMPLES · CHURCHES · ISLAMIC PLACES
Clean, respectful upkeep for places of worship.
PRIME triplex plunger pumps help temples, churches and mosques keep courtyards, corridors, entrances, kitchens and exteriors clean for every gathering, with adjustable working pressure and support from the manufacturer.
- Temples
- Churches
- Mosques & Islamic centres
- Trusts & management committees
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE RELIGIOUS PLACES OPPORTUNITY
Large footfall, festival peaks and surfaces that need care.
Places of worship welcome large crowds, especially around festivals and weekly gatherings. Courtyards, corridors and kitchens need frequent cleaning, often by small teams or volunteers, and many surfaces need a gentler touch than a factory floor.
Surfaces that need care
Stone, old plaster and decorative surfaces need controlled pressure and a test area first.
Community kitchens and dining halls
Cooking and serving areas used for community meals need regular washing.
Small teams and volunteers
Equipment must be simple to use and easy to keep running.
Wet and washing areas
Ablution and washing areas, drains and gutters need frequent flushing.
02APPLICATION PORTFOLIO
Where PRIME pressure can help at a place of worship.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 Bar
Courtyards, corridors & open halls
Wash large hard-floored areas that see heavy footfall.
02150 Bar
Entrance steps, pathways & queue areas
Keep approaches, steps and pilgrim or congregation queues clean and safe.
03150 Bar
Prayer-hall and nave floors
Clean hard flooring where the surface allows it. Test a small area first and avoid carpets.
04150 Bar
Ablution & washing areas
Clean wet areas, floors and surrounding walls that stay damp.
05150 Bar
Community kitchens & dining halls
Wash kitchen floors, serving areas and utensil-washing yards.
06150 or 250 Bar
Parking, drains & boundary walls
Clear parking areas, gutters, drains and plain exterior walls.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Pressure that can be set to suit the surface.
A place of worship needs more than raw pressure. PRIME machines include a pressure regulator / unloader, so the working pressure can be turned down for sensitive surfaces and used at full strength on plain concrete and drains.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Adjustable working pressure
Set the pressure for the surface in front of you instead of using one fixed setting everywhere.
Quieter running
PRIME pumps are designed for smoother, quieter operation, which matters near prayer and worship spaces.
Drive options
Electric drive suits covered halls without exhaust fumes. An IC-engine option suits outdoor areas without a nearby power point.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
Test first, work gently, and keep sacred and delicate items out of the spray.
METHOD 01
Courtyard & corridor wash
A routine clean for large hard-floored areas.
- 1Sweep loose litter and remove movable items
- 2Pre-rinse at moderate pressure from the highest point
- 3Work in overlapping lanes toward the drain
- 4Rinse and allow the floor to dry before the next gathering
METHOD 02
Pre-festival deep clean
A planned clean before a major gathering.
- 1List the areas and the time available
- 2Split the team across zones with one pump per zone where possible
- 3Wash from the highest point down, then floors
- 4Check drains, walkways and entrances last
METHOD 03
Community kitchen & dining-hall wash-down
End-of-day cleaning where meals are prepared and served.
- 1Clear food waste and loose items
- 2Wash walls and washable surfaces top to bottom
- 3Floor pass toward drains
- 4Rinse and inspect before the next meal service
METHOD 04
Delicate-surface approach
How to use pressure carefully on older or decorative surfaces.
- 1Keep idols, murals, carvings, artefacts and electrical fittings out of the spray, and cover or remove movable items
- 2Start with the lowest pressure on a small hidden area and check the result
- 3Increase gradually only if the surface allows it, keeping a safe working distance
- 4If in doubt, ask the trust's conservation adviser before cleaning
05RECOMMENDED PRIME SOLUTIONS FOR RELIGIOUS PLACES
Two core platforms. Choose by application.
150 Bar is the natural starting point. Move to 250 Bar only for plain, hard outdoor surfaces.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR RELIGIOUS PLACESCourtyards, halls, kitchens and everyday upkeep
A controlled starting point for most places of worship. Always test a small area on older surfaces.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR RELIGIOUS PLACESParking areas, drains and plain concrete
Extra pressure for heavy soil on robust outdoor surfaces. Not for decorative or heritage surfaces.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Trusts and committees can check the effect directly. Track these four numbers.
Faster preparation
Effective pressure and a planned method can shorten the cleaning needed before a festival or gathering.
TRACKHours to prepare the premises
Volunteer hours saved
Less hand scrubbing frees volunteers and staff for other work.
TRACKPerson-hours per clean
Measured use
Timing a pass and noting the flow shows the litres needed for each area.
TRACKLitres per area cleaned
Right-sized duty
Choose the platform for the typical job and the power actually available on site.
TRACKkWh or fuel per clean
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the machine ready for the next gathering.
A pump that is down before a festival is a serious problem for a small team. Genuine PRIME spares and a clear support route help keep the machine available when it matters.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Serve trusts, committees and the contractors who work with them.
Temples, churches and mosques buy cleaning equipment through trusts, committees and facility contractors. PRIME dealers can serve all of them from one range.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become the local PRIME dealer.
Work with religious trusts, management committees, facility-management contractors and community-kitchen operators in your area.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Plan your cleaning equipment.
Share the areas you clean, how often and the power available. PRIME will suggest a starting platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Temple · Church · Mosque · Islamic centre · Trust or committee
