Daily repetition
Wash-down happens every shift, so equipment must run reliably day after day.
INDUSTRY SOLUTION · FOOD & DAIRY
Daily hygiene needs dependable pressure.
PRIME triplex plunger pumps support wash-down of kitchens, processing floors, dairy areas and food-handling equipment, with spares and technical support from the manufacturer.
- Food processors
- Commercial kitchens
- Dairy plants
- Cold-chain & packing units
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE FOOD & DAIRY OPPORTUNITY
In food and dairy, cleaning is part of the production process.
Hygiene routines repeat every shift. Floors, drains and equipment surfaces must be cleaned fast and consistently, and the equipment doing it must be reliable and easy to service.
Greasy & organic soil
Fats, residues and spillages build up on floors and surfaces.
Tight windows
Cleaning must finish before the next production run begins.
Wet working areas
Equipment must cope with humid, wet environments.
02APPLICATION PORTFOLIO
Where PRIME pressure supports hygiene routines.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 or 250 Bar
Processing floor wash-down
Clean production floors, walls and drains at end of shift.
02150 Bar
Kitchen & prep area cleaning
Clear grease and residue from commercial kitchen floors and surroundings.
03150 or 250 Bar
Dairy plant surroundings
Wash floors, ramps and receiving areas of dairy facilities.
04150 Bar
Crates, trolleys & bins
Clean returnable crates, trolleys and waste bins.
05150 Bar
Delivery vehicle washing
Wash milk vans, delivery trucks and loading areas.
06250 Bar
Drain & trench cleaning
Flush fats and solids from drainage points.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Built for the daily wash-down cycle.
Food and dairy sites ask a pump to run short, repeated cycles in wet conditions. PRIME's corrosion-resistant brass head, premium sealing and low-noise design address that use.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Wet-duty construction
Forged brass head and nitrile seals as standard for wet working environments.
Quieter operation
Low-noise design suits enclosed processing and kitchen areas.
Spares readiness
Genuine wear parts and a clear support route help routine maintenance avoid stalling production.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
A structured clean-down protects both hygiene and the next shift.
METHOD 01
End-of-shift wash-down
Standard sequence for processing and prep areas.
- 1Remove product and loose waste
- 2Top-down pass over equipment and walls
- 3Floor pass toward drains
- 4Rinse and squeegee; sign off the area
METHOD 02
Crate and trolley wash
A dedicated station for returnable containers.
- 1Load crates at the wash point
- 2Pressure-wash all faces
- 3Rinse and drain
- 4Stack to dry
METHOD 03
Drain flush routine
Keep drains clear of fats and solids.
- 1Remove surface debris
- 2Apply a pressure pass in the trench
- 3Continuous rinse
- 4Visual check of flow
METHOD 04
Vehicle & dock wash
Keep loading areas and delivery vehicles clean.
- 1Clear the dock area
- 2Pressure-wash vehicle and dock floor
- 3Rinse and drain
- 4Park clean vehicles in the designated bay
05RECOMMENDED PRIME SOLUTIONS FOR FOOD & DAIRY
Two core platforms. Choose by application.
Choose by area size and how heavy the soil is.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR FOOD & DAIRYKitchens, crates and routine wash-down
A good fit for regular cleaning in food-handling areas.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR FOOD & DAIRYLarge floors, drains and heavy build-up
For bigger plants and tougher fatty deposits.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Hygiene has a cost. These four numbers show where it goes.
Shorter clean-down
The right pressure shortens each wash-down so lines restart on schedule.
TRACKMinutes per clean-down
Fewer manual passes
Pressure lifts residue that would otherwise need prolonged scrubbing.
TRACKLabour-hours per shift
Proportionate use
A fixed method keeps water use matched to the area cleaned.
TRACKLitres per clean-down
Right-sized duty
Match motor platform to actual daily run-hours.
TRACKkWh per operating hour
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Never let a pump hold up production.
A wash-down pump is part of the daily routine. Genuine spares, valves and accessories from PRIME help keep maintenance planned rather than reactive.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Support the food and dairy supply chain.
Food processors, dairies and kitchens need local equipment suppliers who can also stock spares. PRIME dealers are positioned for exactly that.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become a PRIME dealer for food & dairy.
Work with processors, dairy plants, commercial kitchens and facility managers in your area.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Specify your wash-down system.
Share the area, soil type and shift pattern. PRIME will suggest a platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Food processor · Commercial kitchen · Dairy plant · Packing unit
