Stubborn residue
Oil, grease, scale and process deposits resist low-pressure cleaning.
INDUSTRY SOLUTION · INDUSTRIAL CLEANING
Pressure for plants that cannot afford to stop.
PRIME triplex plunger pumps support routine and shutdown cleaning of plant floors, machinery and equipment, backed by manufactured spares and application engineering.
- Manufacturing plants
- Maintenance teams
- Contract cleaning firms
- Utilities & process units
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE INDUSTRIAL CLEANING OPPORTUNITY
Cleaning is a maintenance task with a production deadline.
Industrial cleaning teams work against shutdown windows, tough residues and safety rules. Equipment must deliver real pressure, survive hard duty and be repairable on site.
Shutdown windows
Cleaning has to fit inside planned stoppages, so time per job matters.
Hard duty
Long run-hours and rough handling punish pumps and accessories.
Safety & housekeeping
Clean floors and machinery reduce slips and make inspection easier.
02APPLICATION PORTFOLIO
Where PRIME pressure fits in a plant.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01250 Bar
Plant floor cleaning
Remove oil, dust and process residue from large floor areas.
02150 or 250 Bar
Machinery & equipment cleaning
Clean machines ahead of inspection, servicing or changeover.
03150 or 250 Bar
Tank & vessel exteriors
Wash accessible exterior surfaces of tanks, pipes and structures.
04250 Bar
Drain & pit cleaning
Clear sludge and build-up from drains, sumps and pits.
05150 Bar
Conveyor & line wash-down
Routine wash-down of conveyors, frames and guards.
06250 Bar
Shutdown clean-up
High-intensity cleaning during planned maintenance windows.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
A pump engineered for working plants.
Industrial duty is long, repeated and unforgiving. PRIME's material choices and CNC-machined construction target exactly that kind of use.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Robust materials
Forged brass head and ceramic plungers are chosen for service life under load.
Configured to the duty
Pressure, flow, power and installation are reviewed against the real application.
Custom engineering route
Where the standard platform does not fit, PRIME can engage on a tailored solution.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
Clean by zone, in a defined order, with the right pressure for each surface.
METHOD 01
Zone-based plant wash
Divide the plant into zones so cleaning is planned, not ad hoc.
- 1Isolate and prepare equipment per site safety rules
- 2Top-down pass on structures and machinery
- 3Floor pass toward drains
- 4Inspect, rinse and sign off the zone
METHOD 02
Machinery clean-down
Pressure cleaning before inspection or service.
- 1Select nozzle and distance for the surface
- 2Work systematically around the machine
- 3Pay attention to guards, frames and joints
- 4Rinse and record condition
METHOD 03
Drain and pit clearing
Break up and flush build-up in drainage points.
- 1Remove loose solids
- 2Apply higher pressure to compacted deposits
- 3Flush with continuous rinse
- 4Verify free flow
METHOD 04
Shutdown campaign
Plan pumps and crews around a fixed maintenance window.
- 1List areas and estimated cleaning time
- 2Allocate pumps and hose runs
- 3Run in parallel zones
- 4Close out with spare-part and wear check
05RECOMMENDED PRIME SOLUTIONS FOR INDUSTRIAL CLEANING
Two core platforms. Choose by application.
Start with the toughest recurring surface.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR INDUSTRIAL CLEANINGRoutine wash-down and light residue
Everyday conveyor, frame and equipment cleaning.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR INDUSTRIAL CLEANINGHeavy residue, floors and shutdown work
More pressure for deposits, drains and large-area cleaning.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Plant managers should see these numbers move. Measure them before and after.
Faster zone completion
Right pressure on stubborn residue shortens the number of passes needed per zone.
TRACKHours per cleaning zone
Crew hours redirected
Fewer manual scrubbing hours free the team for inspection and maintenance.
TRACKCrew-hours per shutdown
Controlled consumption
Time-box passes and note flow to understand the water used per cleaning task.
TRACKLitres per zone
Duty-matched motor
Choose the platform for the actual job to avoid over- or under-sizing.
TRACKkWh per cleaning shift
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Plan maintenance before the pump needs it.
Plants run planned maintenance, and PRIME spares fit that routine: genuine wear parts, valves and accessories from the manufacturer.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Supply the plant maintenance market.
Industrial customers buy pumps, then keep buying spares, valves and accessories. PRIME dealers can build a long-term account relationship around that cycle.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Serve local industry with PRIME.
Work with manufacturing units, maintenance contractors and industrial suppliers in your region.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Specify your cleaning duty.
Share the surfaces, residues, working pressure and run-hours. PRIME will review and recommend.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Manufacturing plant · Maintenance contractor · Contract cleaning · Process unit
