Hardening cement
Concrete residue gets harder every hour it is left on drums, chutes and buckets.
INDUSTRY SOLUTION · CONSTRUCTION EQUIPMENT
Keep heavy machines clean, inspectable and earning.
PRIME triplex plunger pumps give contractors and rental fleets the pressure to remove mud, cement and grime, so machines are easier to inspect, service and keep working.
- Contractors
- Equipment rental fleets
- Ready-mix & concrete plants
- Site workshops
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE CONSTRUCTION EQUIPMENT OPPORTUNITY
Cement, clay and grease do not wait for the weekend.
Construction machines work in the worst conditions and come back coated in mud, concrete and oil. Cleaning is needed to inspect, service and avoid hardened build-up, and the equipment must survive the same site.
Mud and clay
Packed soil hides wear, leaks and cracks.
Large machines
Big surfaces mean long cleaning times with weak equipment.
Rough conditions
Dust, vibration and rough handling are tough on pressure equipment.
02APPLICATION PORTFOLIO
Where PRIME pressure is used around heavy equipment.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01250 Bar
Earth-mover wash-down
Clean excavators, loaders and dozers of mud and clay.
02250 Bar
Concrete mixer & chute cleaning
Remove cement build-up before it hardens.
03150 or 250 Bar
Truck & trailer washing
Keep tippers, trailers and transit vehicles presentable and inspectable.
04250 Bar
Undercarriage & track cleaning
Clear packed soil from tracks, rollers and running gear.
05150 or 250 Bar
Workshop & yard wash-down
Maintain clean workshop floors, wash bays and yards.
06150 Bar
Pre-service clean-down
Wash machines before inspection or repair.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Pressure with headroom for site-grade soiling.
Heavy-equipment cleaning demands more than light-duty washers. PRIME's 250 Bar platform and robust material construction are aimed at that kind of work.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
250 Bar platform
Higher pressure for packed soil and cement residue.
Heavy-duty construction
Die-cast aluminium crankcase, forged brass head and ceramic plungers.
Support for fleets
In-house spares and manufacturer support help keep a wash bay running across many machines.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
Clean early, clean in order, inspect as you go.
METHOD 01
Machine wash-bay routine
A set sequence for every machine that comes in.
- 1Park on the wash pad and secure the machine
- 2Top-down general wash
- 3Targeted pass on tracks, buckets and undercarriage
- 4Rinse and inspect while clean
METHOD 02
Concrete equipment clean-out
Act before cement sets hard.
- 1Remove bulk concrete
- 2Immediate pressure wash of drum, chute and hopper
- 3Rinse thoroughly
- 4Check for remaining residue
METHOD 03
Fleet vehicle wash
Fast, repeatable cleaning for trucks and trailers.
- 1Pre-rinse loose mud
- 2Wheels, arches and body pass
- 3Rinse
- 4Log vehicle and time
METHOD 04
Pre-service clean-down
Give the workshop a clean machine to work on.
- 1Identify service areas
- 2Pressure-wash those areas
- 3Rinse and dry
- 4Hand over to the technician
05RECOMMENDED PRIME SOLUTIONS FOR CONSTRUCTION EQUIPMENT
Two core platforms. Choose by application.
The 250 Bar platform is the natural starting point.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR CONSTRUCTION EQUIPMENTTrucks, light machines and pre-service cleaning
Suited to routine vehicle washing and lighter soil.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR CONSTRUCTION EQUIPMENTEarth-movers, concrete equipment and heavy soil
More pressure for packed clay, cement and large surfaces.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Machine downtime is expensive. Track these four measures.
Faster wash per machine
Higher pressure on packed soil reduces repeat passes.
TRACKMinutes per machine
Less chipping and scraping
Prompt pressure cleaning reduces manual removal of hardened material.
TRACKLabour-hours per machine
Measured consumption
Time and flow give a clear litres-per-machine figure.
TRACKLitres per machine
Match to the site
Electric or IC-engine options suit sites with different power access.
TRACKkWh or fuel per shift
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the wash bay as reliable as the fleet.
A wash bay that is down means dirty machines and missed inspections. PRIME's genuine spares and support help keep it running.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Supply the contractors and fleets in your region.
Contractors, rental companies and concrete plants all need dependable wash equipment, and they all need spares. PRIME dealers can serve that demand.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become a PRIME dealer for construction.
Work with contractors, rental fleets, ready-mix plants and construction-equipment dealers.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Specify your machine-wash system.
Share the machines you wash, soil type and daily volume. PRIME will recommend a platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Contractor · Rental fleet · Concrete plant · Site workshop
