Tight changeovers
A late-night event followed by a morning booking leaves a short window for a proper clean-down.
INDUSTRY SOLUTION · MALLS, MARRIAGE & CONVENTION HALLS
Venues are judged by how clean they look when the doors open.
PRIME triplex plunger pumps help malls, marriage halls and convention centres clean parking, entrances, hall floors, kitchens and service areas between events, with spares and support from the manufacturer.
- Shopping malls
- Marriage halls
- Convention & exhibition halls
- Event venues
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE MALLS, MARRIAGE & CONVENTION HALLS OPPORTUNITY
The next event starts a few hours after the last one ends.
Malls and event venues run on tight changeovers and high footfall. Parking, entrances, back-of-house kitchens and drains pick up heavy soil, and most of the cleaning has to happen at odd hours without disturbing guests.
Heavy footfall and traffic
Parking decks, ramps and entrances collect oil stains, dust, spills and general grime every day.
Kitchens and service areas
Catering kitchens, wash-up areas, waste yards and drains need regular, thorough washing.
Large areas, small crews
Big floor areas are slow to clean by hand, so crew-hours add up quickly.
Noise and disruption
Cleaning near guests, shops or neighbours calls for quieter equipment and sensible timing.
02APPLICATION PORTFOLIO
Where PRIME pressure is used around a venue.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 or 250 Bar
Parking decks & ramps
Remove oil stains, dust and tyre marks from parking floors and ramps.
02150 Bar
Entrances, plazas & walkways
Keep forecourts, steps and pedestrian approaches clean for the first impression.
03150 Bar
Hall & back-of-house floors
Wash hard-floored halls, corridors and service areas after events. Test delicate flooring first.
04150 Bar
Catering kitchens & wash-up areas
Clear grease and food residue from kitchen floors, wash bays and surroundings.
05250 Bar
Waste yards, docks & service areas
Clean bin areas, loading docks and delivery bays that see heavy soiling.
06150 or 250 Bar
Drains, gullies & exteriors
Flush drains and gullies and wash boundary walls and building exteriors.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Repeatable pressure for venues that run to a schedule.
A venue needs a machine that starts when it is needed, runs smoothly and can be serviced quickly. PRIME's triplex plunger platform is built for repeated cleaning cycles, with a pressure regulator on the machine so the working pressure can be set to suit the surface.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Quieter operation
PRIME pumps are designed for smoother, quieter running, which helps when cleaning near guests or neighbours.
Drive to suit the site
Electric drive suits covered and indoor areas. An IC-engine option is available where power points are far away.
Adjustable working pressure
The machine assembly includes a pressure regulator / unloader, so one machine can serve floors, kitchens and heavier outdoor areas.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
A fixed order of work keeps results the same whoever is on shift.
METHOD 01
Event changeover clean
A short, planned clean-down between one event and the next.
- 1Clear tables, decor and loose waste
- 2Pressure-wash hard floors in lanes toward the drain
- 3Rinse and squeegee; allow drying time before the next set-up
- 4Log the time taken so the next changeover can be planned
METHOD 02
Parking & ramp wash
Regular deck cleaning without blocking the whole facility.
- 1Close off a section and clear vehicles
- 2Pre-rinse loose dust and debris
- 3Apply a higher-pressure pass on oil-stained areas
- 4Flush to the drain and reopen the section
METHOD 03
Kitchen & wash-up routine
End-of-service cleaning for catering areas.
- 1Remove food waste and loose items
- 2Top-down pass over walls and equipment surfaces that can be washed
- 3Floor pass toward drains
- 4Rinse and inspect before the next service
METHOD 04
Entrance & façade refresh
A periodic wash of the parts guests see first.
- 1Check the surface and start at lower pressure
- 2Work top to bottom in overlapping strokes
- 3Rinse walkways and steps
- 4Inspect from a distance and touch up
05RECOMMENDED PRIME SOLUTIONS FOR MALLS, MARRIAGE & CONVENTION HALLS
Two core platforms. Choose by application.
Start with 150 Bar for halls and kitchens. Add 250 Bar where parking and service yards need it.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR MALLS, MARRIAGE & CONVENTION HALLSHalls, kitchens, entrances and routine upkeep
The flexible default for everyday venue cleaning. Use lower pressure on delicate surfaces and test a small area first.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR MALLS, MARRIAGE & CONVENTION HALLSParking decks, waste yards and service areas
More pressure for oil stains, packed grime and large outdoor areas.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Venue managers can measure the effect directly. Track these four numbers before and after.
Faster changeover
A fixed method and the right pressure reduce repeat passes, helping the venue turn around sooner.
TRACKHours per clean-down
Crew hours redirected
Less manual scrubbing leaves the team free for set-up and guest-facing work.
TRACKCrew-hours per event
Proportionate use
Timing each pass and noting the flow shows how many litres each area really takes.
TRACKLitres per clean-down
Right-sized duty
Match the platform to the typical job instead of the occasional peak.
TRACKkWh per cleaning shift
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the machine ready for the busy season.
Wedding and festival seasons leave no room for a pump that is waiting for a part. Genuine PRIME spares and a clear support route keep the machine available through a busy event calendar.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Supply the venues in your city.
Malls, halls and event venues are repeat buyers of cleaning equipment and spares. PRIME dealers can serve venue managers, facility contractors and caterers from one product range.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become the local PRIME dealer for venues.
Work with mall management companies, marriage-hall owners, convention centres, facility-management contractors and caterers.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Plan your venue cleaning system.
Share the areas you clean, how often and what power is available. PRIME will recommend a starting platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Shopping mall · Marriage hall · Convention centre · Event venue
