Mixed surfaces
Concrete, tiles, metal, vehicles and walls each need different handling.
INDUSTRY SOLUTION · GENERAL & COMMERCIAL CLEANING
One pressure platform for many cleaning jobs.
PRIME triplex plunger pumps give facility teams and contract cleaners a flexible, serviceable platform for floors, walls, vehicles, yards and outdoor surfaces.
- Facility managers
- Contract cleaning firms
- Warehouses & logistics
- Municipal & public spaces
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE GENERAL & COMMERCIAL CLEANING OPPORTUNITY
Variety is the challenge: no two cleaning jobs are the same.
General and commercial cleaning covers everything from warehouse floors to forecourts. Teams need equipment flexible enough for many surfaces and dependable enough to be used every day.
Multiple sites
Contractors move equipment between locations, so reliability matters.
Time-boxed contracts
Jobs are priced by time, so slow cleaning erodes margin.
Equipment cost over time
Frequent breakdowns and slow spares make a pump expensive to own.
02APPLICATION PORTFOLIO
Where PRIME pressure works across commercial settings.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 or 250 Bar
Warehouse & dock floors
Clean large floor areas, ramps and loading docks.
02150 or 250 Bar
Forecourts & parking areas
Remove oil stains, dust and grime from outdoor surfaces.
03150 Bar
Building exteriors & walls
Wash boundary walls, facades and outdoor structures.
04150 Bar
Vehicle & fleet washing
Wash vans, buses and light commercial vehicles.
05150 or 250 Bar
Public spaces & pathways
Clean pavements, steps and market areas.
06250 Bar
Drain & gully cleaning
Clear debris and sludge from drains and gullies.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
A flexible platform that stays serviceable.
A general-purpose cleaning business needs equipment it can rely on across many different jobs. PRIME pairs a proven triplex plunger platform with manufactured spares and technical support.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Two platforms cover most jobs
150 Bar for routine work, 250 Bar for heavier duty.
Dependable day to day
CNC-machined components and engineered materials aim for consistency.
Support behind the sale
Spares, valves and accessories are available from the same manufacturer.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
A consistent method keeps quality steady across sites and crews.
METHOD 01
Floor and dock wash
Large-area cleaning in a systematic pattern.
- 1Sweep or clear loose debris
- 2Pressure pass in overlapping lanes
- 3Spot-treat stubborn patches
- 4Rinse toward drainage
METHOD 02
Exterior and wall wash
Safe, even cleaning of walls and facades.
- 1Check surface condition
- 2Start low pressure, increase as needed
- 3Work top to bottom
- 4Rinse and inspect
METHOD 03
Fleet wash routine
Fast, repeatable vehicle cleaning.
- 1Pre-rinse
- 2Body and wheels pass
- 3Final rinse
- 4Log vehicle and time
METHOD 04
Contract job setup
Standardise how every site is set up and closed.
- 1Survey water and power at site
- 2Set up pump, hose and accessories
- 3Run the agreed method
- 4Pack down and report
05RECOMMENDED PRIME SOLUTIONS FOR GENERAL & COMMERCIAL CLEANING
Two core platforms. Choose by application.
Start with 150 Bar and move up only where the job demands it.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR GENERAL & COMMERCIAL CLEANINGEveryday facility and vehicle cleaning
The flexible default for most commercial cleaning work.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR GENERAL & COMMERCIAL CLEANINGHeavy deposits, forecourts and drains
For tougher surfaces and larger areas.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Jobs are priced by the hour. Track these four numbers.
Faster per job
Effective pressure and a fixed method reduce time per cleaning task.
TRACKHours per job
Crew hours reclaimed
Less manual scrubbing leaves more crew time for additional work.
TRACKCrew-hours per contract
Measured use
Record flow and run-time to know the water used per job.
TRACKLitres per job
Right-sized duty
Choose the platform for typical work, not occasional peaks.
TRACKkWh per operating hour
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the equipment on the job, not in the workshop.
For contractors, a pump out of action is a contract at risk. Genuine spares and support from PRIME keep downtime short.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Serve every kind of cleaning business.
General cleaning is the broadest market PRIME serves. Dealers can reach facility managers, contractors and fleet owners with one product range.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become a PRIME dealer for commercial cleaning.
Work with facility management firms, contract cleaners, logistics operators and municipal buyers.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Choose the right platform.
Share your typical jobs, surfaces and daily volume. PRIME will recommend a starting point.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Facility manager · Contract cleaner · Warehouse · Public-space operator
